JHEMCU VTX5840 FPV Transmitter 5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX Support OSD 30mm*30mm 4g 2-6S for RC Drone Eachine LAL5 X220S iFlight Nazgul5 Green Hornet Tyro129

Get JHEMCU VTX5840 FPV Transmitter 5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX Support OSD 30mm*30mm 4g 2-6S for RC Drone Eachine LAL5 X220S iFlight Nazgul5 Green Hornet Tyro129

JHEMCU VTX5840 FPV Transmitter
5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX Support OSD
30mm*30mm 4g 2-6S for RC Drone Eachine LAL5 X220S iFlight Nazgul5 Green Hornet Tyro129 

 

VTX5840 series image transmission is 5.8G ISM band analog image transmission. It has the characteristics of stable output power, long transmission distance, strong power filtering, and can ensure that the image has no snowflakes and no horizontal stripes under the maximum throttle. It adopts stackable installation, design 30.5 * 30.5MM M3 screw holes, and the back is equipped with heat sink. The image transmission supports IRC OSD tuning, while retaining the key function, 5 levels of power can be adjusted.

 

Features

1. Fast 5-speed power switching, independent two red indicator lights, indicating the current transmit power 25/200/400/800/1000MW.

2. The frequency point uses 6 LEDs to display 40 channel values.

3. Support OSD tuning.

4. The antenna adopts MMCX to SMA extension cable, which reduces the PCB space.

5. Powerful power chip, input up to 27V, output 5V / 2A low ripple, small interference.

6. Do not install the antenna to power on, it will not burn the picture transmission.

7. Light weight: 4.1g (not including antenna and plug cable).

 

Performance

1. Input voltage: DC 7V-27V (2-6S)

3. Output voltage: DC 5V 2A

4. Power switching: 5th gear 25MW, 200MW, 400MW, 800MW, 1000MW

5. Signal channels: 40

6. Frequency point switch: manual key / IRC OSD (also supports)

7. Antenna interface: MMCX (distribution to SMA extension cable)

8. Dimensions: 36MM * 36MM Pitch: 30.5 * 30.5MM, M3

 

Overall introduction

+ 5V GND VIDEO

Camera power supply (5V)

VIN GND

Input power supply (7-27V)

RXD

Flight controller sends IRCOSD serially

LED indication: L1-L6 channels, P1-P2 power

 

Frequency adjustment

Manual adjustment

FR button Switches channels, 6 LEDs indicate channels. Default channel 5865

Power switching:

POW button Power adjustment. The default shipment is 25MW.

 

Package Included 

1 x VTX

1 x Antenna

1 x JST-SH 1.0mm 6P AV Cable Wire

1 x Antenna Wire

 

JHEMCU VTX5840 FPV Transmitter 5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX Support OSD 30mm*30mm 4g 2-6S for RC Drone Eachine LAL5 X220S iFlight Nazgul5 Green Hornet Tyro129 See detail