Nema 23 2.0N.m Closed Loop Stepper Motor Kits 2 Phase 57 Servo Motor with Hybird Servo Driver Set for CNC Engraving Machine
Description:
Nema 23 2.0N.m Closed Loop Stepper Motor Kits 2 Phase 57 Servo Motor with Hybird Servo Driver Set
Specification:
Motor details:
Model: LC57H276
Phase: 2
Step Angle: 1.8 deg
Current: 3.0A
Inertia Of Rotor: 480g.cm²
Holding Torque: 2.0Nm
Shaft Diameter: 8mm
Motor Total Length: 98mm
Motor Length: 76mm
Motor Weight: 1.2Kg
Driver:
Model: LCDA257S
Voltage: VDC20-50V
Max Current: 6A
Subdivision Range: 400-51200ppr
Signal Voltage: +5V(+12Vor+24V series current limiting resistor)
Pulse Width: 2.5μS
Pulse Form: Pulse+Direction/Pulse+Pulse
Pulse Response Frequency: Max 200KHZ
Size:115x69.3x26.5mm
Weight: 0.21Kg
Features:
No lost step, accurate positioning.
100% rated torque drive motor.
Variable current control technology, high current efficiency.
Low vibration and smooth operation at low speed.
To select position over tolerance threshold and alarm polarity.
Rich output control.
Single and double pulses can be selected.
Built-in acceleration and deceleration control to improve start-stop smoothness.
Users can customize the subdivision.
1000 line encoders.
General application parameters do not need to be adjusted, the factory has been set up.
Package Included:
1pcs & Nema23 2.0Nm Closed Loop Stepper Motor
1pcs & Motor Driver
1pcs & 0.5 meters Motor Cables
1pcs & 3 meters Encoder Cables
More Details:
Nema 23 2.0N.m Closed Loop Stepper Motor Kits 2 Phase 57 Servo Motor with Hybird Servo Driver Set
Specification:
Motor details:
Model: LC57H276
Phase: 2
Step Angle: 1.8 deg
Current: 3.0A
Inertia Of Rotor: 480g.cm²
Holding Torque: 2.0Nm
Shaft Diameter: 8mm
Motor Total Length: 98mm
Motor Length: 76mm
Motor Weight: 1.2Kg
Driver:
Model: LCDA257S
Voltage: VDC20-50V
Max Current: 6A
Subdivision Range: 400-51200ppr
Signal Voltage: +5V(+12Vor+24V series current limiting resistor)
Pulse Width: 2.5μS
Pulse Form: Pulse+Direction/Pulse+Pulse
Pulse Response Frequency: Max 200KHZ
Size:115x69.3x26.5mm
Weight: 0.21Kg
Features:
No lost step, accurate positioning.
100% rated torque drive motor.
Variable current control technology, high current efficiency.
Low vibration and smooth operation at low speed.
To select position over tolerance threshold and alarm polarity.
Rich output control.
Single and double pulses can be selected.
Built-in acceleration and deceleration control to improve start-stop smoothness.
Users can customize the subdivision.
1000 line encoders.
General application parameters do not need to be adjusted, the factory has been set up.
Package Included:
1pcs & Nema23 2.0Nm Closed Loop Stepper Motor
1pcs & Motor Driver
1pcs & 0.5 meters Motor Cables
1pcs & 3 meters Encoder Cables
More Details:
Nema 23 2.0N.m Closed Loop Stepper Motor Kits 2 Phase 57 Servo Motor with Hybird Servo Driver Set for CNC Engraving Machine See detail
