60 Inch Tailgate Bar Pickup Taillight Turn Signal Car LED Strip Light Reverse Brake Lamp DC9-24V

Get 60 Inch Tailgate Bar Pickup Taillight Turn Signal Car LED Strip Light Reverse Brake Lamp DC9-24V

Specification:

Input voltage: DC19-24V

Power: 0.2W/LED

Light source: SMD2835

Quantity of LEDs: 60 yellow+60 red + 30 white leds (150 leds)

Waterproof: yes

Beam angle: 180°

Connection wires: 5 wires

Lighting effects: 4: turn left, turn right, braking, daytime running,brake left, brake right

Applicable car brands: universal, suitable for all car brands

Length: 150cm(60")

 

If your purchased LED tailgate light bar with reverse light option proceed with your installation using the flowing steps:

Carefully remove one of your tail light assemblies.

Power your truck on and pit it into reverse, So that your factory reverse lights are illuminated. It is imperative that you set the parking brake.

Return a volt meter, find the positive 12volt wire that powers your reverse light.

Using a volt meter , find the positive 12volt wire that powers your reverse light.

Once you have found your factory reverse light wire , use a wire stripper to cut and strip the wire.

Run the light bar’s whiter reverse wire to your factory reverse wire.

Use a butt connector to connect the tailgate bar’s white reverse wire to the trucks factory reverse wire. You can also solder or use a tape connector to secure this connection.

Now you can re-install your tail light assembly and tailgate. And test your tailgate light bare to full functionality.

Please don’t connect it on the flasher of vehicle.

 

Package included:

1x 60" LED tailgate strip light 

60 Inch Tailgate Bar Pickup Taillight Turn Signal Car LED Strip Light Reverse Brake Lamp DC9-24V See detail