SG-668E 220V Hot Digital Electric Heat Tool 1800W Temperature Paint Stripper DIY Blower Tool
Specification:
● Type: Digital display hot air tool
● Model: SG-668E
● Rated voltage: AC 220V
● Rated Input Power: 1800W
● Working temperature: 50 ℃ -550 ℃
● Air flow: 250L / 500L / Min
● decibel: less than 40 db
Feature:
● LCD display temperature
● A file maximum temperature minimums temperature of 50 ℃ to 550 ℃ the lowest temperature of 50 ℃ in second gear the maximum temperature of 550 ℃.
● Temperature can be adjusted continuously in a wide range
● Sensor closed loop, microcomputer zeros trigger temperature control, temperature accurate and stable
● High-quality nickel-chromium alloy wire heating element, imports switches, imported motor
Product temperature setting
● 50 ℃ -150 ℃ (122-300OF) to thaw frozen pipes
● 205 ℃ -230 ℃ (400-450 OF) plastic pipe bend or soften dry paint or flour
● 230 ℃ -290 ℃ (450--550 OF) softened adhesive material
● 425 ℃ -455 ℃ (800-850 OF) softened weld material
● 480 ℃ -510 ℃ (900 OF-950 OF) loosen rusted bolts
● 520 ℃ -550 ℃ (1000 OF-1100 OF) can remove the painton't unplug the power supply immediately after the mosquito is caught. Let the fan continue to run until the mosquito is dehydrated and dried to death.
NOTE:
1. The first power hot air blower start, the switch plate to the lower section (LOW) or high segment (HIGH), hear the "buzzing" sounds (indicating that the motor is in operation), electric wire will slowly red and some of the smoke will emerge, because the surface electric wires coated with a layer of yellow oil, used for anti-rust, smoke will soon disappear. After a period of time, such as before the tube becomes black, this is due to the high temperature actions, and for the use of a heat g-un, without prejudice.
2. If the motor does not rotate in use, should immediately switch to the OFF position, and unplug it, this hot air g-un to send sales or manufacturer for repair.
3. Stop using, should the switch to the OFF position and stand on the hot air g-un on a plane galvanized iron pipe head up, allowed to cool naturally, such as galvanized iron pipe upside down, back inside so heat can not be quickly distributed, It causes motor internal temperature, while reducing the life of hot air g-un. After galvanized iron pipe cooling, it can store up to it.
4. Blow for cooling and hot air g-un to help extend the life and accident, when you stop using the hot air g-un switch wire from the high segment (HIGH) transferred to the low stage (LOW) after 20 seconds, the transfer from the low stage to OFF, and promptly pulled the plug.
Package Included:
1x Electric Heat Tool
1x Nozzle
SG-668E 220V Hot Digital Electric Heat Tool 1800W Temperature Paint Stripper DIY Blower Tool See detail
